LED Panel 60x60
60x60cm led panels
60x60cm LED panels are the most commonly used and common panels. These panels fit into a standard ceiling system. LED panels are an environmentally friendly replacement for fluorescent tubes, for example. LED panels save you a lot of energy and money. 60x60 LED panels last 50,000 hours on average. Our LED panels emit a nice diffusing light and are suitable for use in humid areas.
The difference between Back-lit and Edge lit panels
Back-lit panels are illuminated from the back of the panel, this is why the panel is 35mm at the back. because the LED chips are attached to the back, the panel is lightweight and has an efficient luminous flux.
Edge-lit Panels are illuminated from the sides of the panel, so the light chips are spread over the entire panel, this makes these panels extra thin, which is 9mm. They are slightly heavier than back-lit panels, though.
Both panels are High Lumen (120 lumens per watt) and last 50,000 hours, are economical in consumption and are optionally dimmable.
What are UGR<19 panels?
The UGR (Unified Glare Rating) value is a value that indicates the degree of unpleasant glare.
The lower the value, the less light pollution a person will experience. Applying the right lighting deserves a lot of attention because it greatly affects mood, productivity and functioning. The light should be bright enough to perform work well, but should not cause glare or dazzle.
Glare can be caused either directly or indirectly. Direct glare can involve a light source shining into your eyes, while indirect glare involves reflection of the light source on a reflective surface. The indirect form is much underestimated because it is not directly noticeable, effects of too high UGR value can be headaches, tingling/fatigued eyes or feeling tired and slightly dizzy.
Saves 70% | App and voice control | Incl. WiFi driver | Alexa, Google assistant, IFTTT
Saves 70% | Optional dimmable | White rim | 3000K - 4000K - 6000K
Saves 70% | Anti light discomfort | Optional dimmable | White rim | 3000K - 4000K - 6000K
Saves 70% | Optional dimmable | Extra thin | White rim | 3000K - 4000K - 6000K
Saves 70% | Anti light discomfort | Optional dimmable | Extra thin | White rim | 3000K - 4000K - 6000K
Saves 70% | Illuminated edge | Incl. flicker-free LED driver | 3000K - 4000K - 6000K
- Free delivery from €50
- Pay afterwards with Klarna
- Fast delivery
Saves 70% | Extra thin | White rim | 3000K - 4000K - 6000K
Saves 70% | Light color adjustable from warm to cold white | White rim
Saves 70% | Water resistant IP65 | Extra thin panel | White rim
Suitable for Edge-Lit LED Panels | Aluminum | Easy click system
1 Meter | Adjustable length | Stainless steel
4 Pieces | For securing LED panels in e.g. plaster
Dimmable driver 0-10V | Suitable for LED Panels
Dual output current: 0.7/0.8A | Flicker-free | 42V | 230V
Adjustable output current: 0.7/0.8/0.9/1.05A | Dali Dimmable and Flicker Free
Overige categorieën in LED Panels
LED Panel 60x60
60x60cm led panels
60x60cm LED panels are the most commonly used and common panels. These panels fit into a standard ceiling system. LED panels are an environmentally friendly replacement for fluorescent tubes, for example. LED panels save you a lot of energy and money. 60x60 LED panels last 50,000 hours on average. Our LED panels emit a nice diffusing light and are suitable for use in humid areas.
The difference between Back-lit and Edge lit panels
Back-lit panels are illuminated from the back of the panel, this is why the panel is 35mm at the back. because the LED chips are attached to the back, the panel is lightweight and has an efficient luminous flux.
Edge-lit Panels are illuminated from the sides of the panel, so the light chips are spread over the entire panel, this makes these panels extra thin, which is 9mm. They are slightly heavier than back-lit panels, though.
Both panels are High Lumen (120 lumens per watt) and last 50,000 hours, are economical in consumption and are optionally dimmable.
What are UGR<19 panels?
The UGR (Unified Glare Rating) value is a value that indicates the degree of unpleasant glare.
The lower the value, the less light pollution a person will experience. Applying the right lighting deserves a lot of attention because it greatly affects mood, productivity and functioning. The light should be bright enough to perform work well, but should not cause glare or dazzle.
Glare can be caused either directly or indirectly. Direct glare can involve a light source shining into your eyes, while indirect glare involves reflection of the light source on a reflective surface. The indirect form is much underestimated because it is not directly noticeable, effects of too high UGR value can be headaches, tingling/fatigued eyes or feeling tired and slightly dizzy.
